top of page
resin-cleanse-bw-logo

Resin Cleanse Safety Sheet

Hazard(s) Identification: The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. Resin Cleanse is readily biodegradable.

​

Stability and Reactivity: The product is stable and non-reactive under normal conditions of use, storage and transport. Material is stable under normal conditions. No dangerous reactions are known under conditions of normal use.

   

Care & Use: Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Be sure to completely wash out accessory, bowl and chamber before using as an inhalant. Prolonged skin contact may cause temporary irritation. Direct contact with eyes may cause temporary irritation. Resin Cleanse is not expected to cause skin sensitization if the consumer washes their hands thoroughly with soap and water after each use. Wash clothing if soiled with Resin Cleanse. Store away from incompatible materials. Dispose of contents/container/waste/residue in accordance with local/ regional/national/international regulations and in accordance with local authority requirements.

​

First-aid Measures: If any of the following occur: Inhalation, skin contact, eye contact or ingestion of Resin Cleanse move to fresh air and thoroughly wash impacted area off with soap and water; rinse mouth out with clean water if ingested or inhaled. If symptoms develop or persist immediate medical attention is required and special treatment is needed. Ensure that medical personnel are aware of the material(s) involved and take precautions to protect themselves.

​

Fire-Fighting Measures: No unusual fire or explosion hazards were noted when testing Resin Cleanse. However, in the rare event there are fire hazards then one should combat with water fog, foam or dry chemical powder. Do not however use water jet as an extinguisher, as this will spread the fire. In the unlikely event of a fire involving Resin Cleanse, a breathing apparatus and full protective clothing should be worn and standard firefighting procedures should be applied. Move containers away from fire area and consider the hazards of other involved or proximate materials (if you can do so without risk).

​

Handling and Storage: For safe handling and safe storage, keep Resin Cleanse away from any incompatible material. If there are large spills stop the flow of material if this can be done without risk by diking the spilled material, where this is possible. Cover impacted area with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into sealed containers. Following product recovery and mitigation, thoroughly flush the contaminated area with water.


For small spills, wipe up with absorbent material such as cloth or fleece and clean surface thoroughly to remove any residual contamination. Never return spills to the original containers for re-use. And do not handle, store or open near an open flame, sources of heat or sources of ignition. Wear appropriate personal protective equipment and observe good hygiene practices, such as avoiding contact with eyes, mouth or body - and most importantly - avoid prolonged exposure to Resin Cleanse. Wash any contaminated clothing before reuse. Protect material from direct sunlight. Store in original tightly closed container. Provide adequate ventilation when using Resin Cleanse.

​

Exposure Controls: No biological exposure limits were noted for the ingredient(s) contained in Resin Cleanse, however good general ventilation (typically ten air changes per hour) should be used when working with the material so that ventilation rates are matched to current conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls when using Resin Cleanse in order to maintain healthy and acceptable airborne levels. For prolonged or repeated skin contact use suitable protective gloves.

​

Toxicological Information: No adverse effects due to inhalation are expected and no adverse effects due to skin contact are expected when using Resin Cleanse. However, direct contact with eyes may cause temporary irritation. No hazardous decomposition products are known and Resin Cleanse is expected to be a low ingestion hazard. Resin Cleanse is not expected to cause reproductive or developmental effects.


Transport information: Resin Cleanse is not regulated as dangerous goods by DOT, IATA, IMDG. We do however encourage any bulk transportation of the product to be in accordance to Annex II of MARPOL 73/78.

 

Terms and Conditions: This safety sheet is designed only as guidance for the products to which it applies. To the greatest extent permitted by applicable law, nothing contained herein creates any legal obligation including contractual obligations, expressed or implied warranties, including any warranties of merchantability or fitness for particular purpose; or confers any intellectual property rights, including rights to use trademarks or a license to use patents, issued or pending. The information contained herein is based on the manufacturer's own study and the work of others, and is subject to change at any time without further notice. There is no warranty, expressed or implied, as to the accuracy, completeness or adequacy of the information contained herein, and neither the provider nor the manufacturer (nor the agents, directors, officers, contractors or employees of either) are liable to any party for any damages of any nature, including direct, special or consequential damages arising out of or in connection with the accuracy, completeness, adequacy or furnishing of any information in this safety sheet, or in any other way related (directly or indirectly) to the aforementioned disclosures in this safety sheet. The receipt and use of this information constitutes consent to these terms and conditions

bottom of page